Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
 
Product Search
Educational Equipments
 

Heat Engine Lab/ IC Engine Lab

 
 
 
TWO STAGE AIR COMPRESSOR TEST RIG

DESCRIPTION:-
The 'J.P.T.I' unit consist of one experimental type two stage reciprocating air compressor air cooled inter cooler ,suitable for a pressure of 12 kg/cm2 & having a displacement of 0.168 m3/min. driven by squirrel cage induction motor of 2 H.P. Energy meter & stop watch to determine the input to the motor. The above motor suited for 400/440 V. 3 ph. 50 cycles A. C. supply. The motor is provided with switch & starter.

RANGE OF EXPERIMENT:-
To conduct a performance test on the two stage reciprocating air compressor and to determine the volumetric efficiency and isothermal efficiencies at various delivery pressures.

SPECIFICATION:-
• Compressor: Two stage with intercooler.
• Diameter of LP Cylinder: 55mm
• Diameter of HP cylinder: 50 mm
• Stroke Length: 65mm
• Compressor Speed: 720 rpm
• 2HP A/C Motor
• Air intake Measurement: M/S Tank with Orifice-meter and Manometer
• Bourdon Tube Pressure gauges to measure the pressures.
• Three Phase energy meter.
• Multi-channel temperature Indicator to measure various Temperatures.
• Pressure relief valves.

SERVICE REQUIRED:-
• Suitable floor space to mount apparatus.
• 32 amps Three Phase Electrical Connection.

J. P. TECHNO INSTRUMENTS
 
Heat Engine Lab
 
 
J. P. TECHNO INSTRUMENTS
953, Bazar Peth Road, Masur
Tal-Karad, Dist - Satara. (Mh)
Cell : + 91 - 98220 48448
Web : www.jptechnoindia.com
 
 
 
 
 
 
SINGLE CYLINDER FOUR STROKE DIESEL ENGINE WITH HYDRAULIC DYNAMOMETER

Engine : Single-cylinder 4-stroke diesel Engine, Natural aspirated type (Comet make)
Maximum power (P) : 6.0 HP. (Appx. after modification of engine)
Rated speed (N) : 1500 R.P.M.
Speed measurement : Digital RPM Indicator OR Tachometer at Extra Cost
Temperature : Multi - Channel digital Temperature Indicator
Compression Ratio (CR) : 6 to 18 (Variable by crank displacement setup)
Clearance Volume (Vc) : 35 Cm3
Swept Volume (V) : 256 Cm3
Piston Stroke (L) : 66 mm
Bore (D) : 70 mm
Starting : manual cranking
Loading (BHP, Maximum) : Hydraulic Dynamometer
Water cooling : Water cooling for auxiliary Head
Exhaust gas calorimeter : Shell and Tube Type Calorimeter
(For Heat balance sheet)
Engine Output (Kg.) : Digital Load Indicator for dynamometer
Air flow : By M/S tank, Orifice plate, a Manometer
Fuel flow rate : Glass Burette with cover
Required Service : 15 amp single phase electrical connection
1/2" Continuous water supply
Proper Rigid Concrete foundation

The whole setup is fitted on M.S. Frame & Control panel.

J. P. TECHNO INSTRUMENTS
 
 
 
J. P. TECHNO INSTRUMENTS
953, Bazar Peth Road, Masur
Tal-Karad, Dist - Satara. (Mh)
Cell : + 91 - 98220 48448
Web : www.jptechnoindia.com
 
 
 
 
 
 
SINGLE CYLINDER FOUR STROKE DIESEL ENGINE WITH ROPE BRAKE DYNAMOMETER

Engine : Single-cylinder 4-stroke diesel Engine, Natural aspirated type (Comet make)
Maximum power (P) : 6.0 HP. (Appx. after modification of engine)
Rated speed (N) : 1500 R.P.M.
Speed measurement : Digital RPM Indicator OR Tachometer at Extra Cost
Temperature : Multi - Channel digital Temperature Indicator
Compression Ratio (CR) : 6 to 18 (Variable by crank displacement setup)
Clearance Volume (Vc) : 35 Cm3
Swept Volume (V) : 256 Cm3
Piston Stroke (L) : 66 mm
Bore (D) : 70 mm
Starting : manual cranking
Loading (BHP, Maximum) : Rope Brake Dynamometer
Water cooling : Water cooling for auxiliary Head
Exhaust gas calorimeter : Shell and Tube Type Calorimeter
(For Heat balance sheet)
Engine Output (Kg.) : By spring balance for dynamometer
Air flow : By M/S tank, Orifice plate, a Manometer
Fuel flow rate : Glass Burette with cover
Required Service : 15 amp single phase electrical connection
1/2" Continuous water supply
Proper Rigid Concrete foundation

The whole setup is fitted on M.S. Frame & Control panel.

J. P. TECHNO INSTRUMENTS
 
 
 
J. P. TECHNO INSTRUMENTS
953, Bazar Peth Road, Masur
Tal-Karad, Dist - Satara. (Mh)
Cell : + 91 - 98220 48448
Web : www.jptechnoindia.com
 
 
 
 
 
 
SINGLE CYLINDER FOUR STROKE PETROL ENGINE WITH ELECTRICAL DYNAMOMETER

Engine : Single-cylinder 4-stroke Petrol Engine, (HONDA-GX160 make)
Maximum power (P) : 4.8 HP (3.6 kW) @ 3,600 rpm
Rated speed (N) : 3600 R.P.M.
Speed measurement : Digital RPM Indicator OR Tachometer at Extra Cost
Temperature : Multi - Channel digital Temperature Indicator
Compression Ratio (CR) : 9.0 : 1
Net Torque : 7.6 lb-ft (10.3 Nm) @ 2,500 rpm
Displacement : 163 Cm3 Piston Stroke (L) : 45 mm
Bore (D) : 68 mm
Starting : Recoil Starter
Loading (BHP, Maximum) : Electrical Dynamometer with heater coils
Engine cooling : Air Cooled
Exhaust gas calorimeter : Shell and Tube Type Calorimeter
(For Heat balance sheet)
Engine Output (watt) : Digital Voltmeter and Ammeter for dynamometer
Air flow : By M/S tank, Orifice plate, a Manometer
Fuel flow rate : Glass Burette with cover
Required Service : 15 amp single phase electrical connection
1/2" Continuous water supply
Proper Rigid Concrete foundation

The whole setup is fitted on M.S. Frame & Control panel.

 

J. P. TECHNO INSTRUMENTS
 
 
 
J. P. TECHNO INSTRUMENTS
953, Bazar Peth Road, Masur
Tal-Karad, Dist - Satara. (Mh)
Cell : + 91 - 98220 48448
Web : www.jptechnoindia.com
 
 
 
 
 
 
SINGLE CYLINDER FOUR STROKE PETROL ENGINE WITH ROPE BRAKE DYNAMOMETER

Engine : Single-cylinder 4-stroke Petrol Engine, (HONDA-GX160 make)
Maximum power (P) : 4.8 HP (3.6 kW) @ 3,600 rpm
Rated speed (N) : 3600 R.P.M.
Speed measurement : Digital RPM Indicator OR Tachometer at Extra Cost
Temperature : Multi - Channel digital Temperature Indicator
Compression Ratio (CR) : 9.0 : 1
Net Torque : 7.6 lb-ft (10.3 Nm) @ 2,500 rpm
Displacement : 163 cm3
Piston Stroke (L) : 45 mm
Bore (D) : 68 mm
Starting : Recoil Starter
Loading (BHP, Maximum) : Rope Brake Dynamometer
Engine cooling : Air Cooled
Exhaust gas calorimeter : Shell and Tube Type Calorimeter
(For Heat balance sheet)
Engine Output (watt) : Spring Balance for dynamometer
Air flow : By M/S tank, Orifice plate, a Manometer
Fuel flow rate : Glass Burette with cover
Required Service : 15 amp single phase electrical connection
1/2" Continuous water supply
Proper Rigid Concrete foundation

The whole setup is fitted on M.S. Frame & Control panel.

J. P. TECHNO INSTRUMENTS
 
 
 
J. P. TECHNO INSTRUMENTS
953, Bazar Peth Road, Masur
Tal-Karad, Dist - Satara. (Mh)
Cell : + 91 - 98220 48448
Web : www.jptechnoindia.com
 
 
 
 
 
 
SINGLE CYLINDER TWO STROKE PETROL ENGINE WITH ROPE BRAKE DYNAMOMETER

Engine : Single-cylinder 2-stroke Petrol Engine, (Bajaj make)
Maximum power (P) : 2.2 Kw @ 1500 RPM
Rated speed (N) : 1500 R.P.M.
Speed measurement : Digital RPM Indicator OR Tachometer at Extra Cost
Temperature : Multi - Channel digital Temperature Indicator
Compression Ratio (CR) : 8.8:1
Net Torque : 9.70 N-m
Displacement : 100cc
Piston Stroke (L) : 57.7 mm
Bore (D) : 57 mm
Starting : Kick Start
Loading (BHP, Maximum) : Rope Brake Dynamometer
Engine cooling : Air Cooled
Exhaust gas calorimeter : Shell and Tube Type Calorimeter
(For Heat balance sheet)
Engine Output (watt) : Spring Balance for dynamometer
Air flow : By M/S tank, Orifice plate, a Manometer
Fuel flow rate : Glass Burette with cover
Required Service : 15 amp single phase electrical connection
1/2" Continuous water supply
Proper Rigid Concrete foundation

The whole setup is fitted on M.S. Frame & Control panel.

J. P. TECHNO INSTRUMENTS
 
 
 
J. P. TECHNO INSTRUMENTS
953, Bazar Peth Road, Masur
Tal-Karad, Dist - Satara. (Mh)
Cell : + 91 - 98220 48448
Web : www.jptechnoindia.com
 
 
 
 
 
 
MULTI CYLINDER FOUR STROKE DIESEL ENGINE WITH EDDY CURRENT DYNAMOMETER

Engine : Multi-cylinder 4-stroke diesel Engine, (Mahindra make)
Maximum power (P) : 55 @ 3000 RPM (DIN70020)
Rated speed (N) : 3000 R.P.M.
Speed measurement : Digital RPM Indicator
Temperature : Multi - Channel digital Temperature Indicator
Compression Ratio (CR) : 18:1
Stroke length : 101.6 mm
Capacity : 2523 cc
No. of cylinders : Four
Bore (D) : 88.9 mm / 101.6 mm
Starting : Key Start with battery
Loading (BHP, Maximum) : Eddy Current Dynamometer
Water cooling : Water cooling for auxiliary Head
Exhaust gas calorimeter : Shell and Tube Type Calorimeter
(For Heat balance sheet)
Engine Output (Kg.) : Spring Balance for dynamometer
Air flow : By M/S tank, Orifice plate, a Manometer
Fuel flow rate : Glass Burette with cover
Required Service : 15 amp single phase electrical connection
1/2" Continuous water supply
Proper Rigid Concrete foundation

The whole setup is fitted on M.S. Frame & Control panel.

J. P. TECHNO INSTRUMENTS
 
 
 
J. P. TECHNO INSTRUMENTS
953, Bazar Peth Road, Masur
Tal-Karad, Dist - Satara. (Mh)
Cell : + 91 - 98220 48448
Web : www.jptechnoindia.com
 
 
 
 
 
 
MULTI CYLINDER FOUR STROKE DIESEL ENGINE WITH HYDRAULIC DYNAMOMETER

Engine : Multi-cylinder 4-stroke diesel Engine, (Mahindra make)
Maximum power (P) : 55 @ 3000 RPM (DIN70020)
Rated speed (N) : 3000 R.P.M.
Speed measurement : Digital RPM Indicator
Temperature : Multi - Channel digital Temperature Indicator
Compression Ratio (CR) : 18:1
Stroke length : 101.6 mm
Capacity : 2523 cc
No. of cylinders : Four
Bore (D) : 88.9 mm / 101.6 mm
Starting : Key Start with battery
Loading (BHP, Maximum) : Hydraulic Dynamometer
Water cooling : Water cooling for auxiliary Head
Exhaust gas calorimeter : Shell and Tube Type Calorimeter
(For Heat balance sheet)
Engine Output (Kg.) : Digital Load Indicator for dynamometer
Air flow : By M/S tank, Orifice plate, a Manometer
Fuel flow rate : Glass Burette with cover
Required Service : 15 amp single phase electrical connection
1/2" Continuous water supply
Proper Rigid Concrete foundation

The whole setup is fitted on M.S. Frame & Control panel.

J. P. TECHNO INSTRUMENTS
 
 
 
J. P. TECHNO INSTRUMENTS
953, Bazar Peth Road, Masur
Tal-Karad, Dist - Satara. (Mh)
Cell : + 91 - 98220 48448
Web : www.jptechnoindia.com
 
 
 
 
 
 
MULTI CYLINDER FOUR STROKE PETROL ENGINE WITH EDDY CURRENT DYNAMOMETER

Engine : Multi-cylinder 4-stroke Petrol Engine, (Maruti make)
Maximum power (P) : 27.6 kW (37 HP)
Rated speed (N) : 5000 R.P.M.
Speed measurement : Digital RPM Indicator
Temperature : Multi - Channel digital Temperature Indicator
Compression Ratio (CR) : 9.2:1
Stroke length : 72.0mm
Connecting rod length : 114mm
Bore (D) : 66.5mm
No. of cylinders : Three or Four
Starting : Key Start with battery
Loading (BHP, Maximum) : Eddy Current Dynamometer
Water cooling : Water cooling for auxiliary Head
Exhaust gas calorimeter : Shell and Tube Type Calorimeter
(For Heat balance sheet)
Engine Output (Kg.) : Spring Balance for dynamometer
Air flow : By M/S tank, Orifice plate, a Manometer
Fuel flow rate : Glass Burette with cover
Required Service : 15 amp single phase electrical connection
1/2" Continuous water supply
Proper Rigid Concrete foundation

The whole setup is fitted on M.S. Frame & Control panel.

 

J. P. TECHNO INSTRUMENTS
 
 
 
J. P. TECHNO INSTRUMENTS
953, Bazar Peth Road, Masur
Tal-Karad, Dist - Satara. (Mh)
Cell : + 91 - 98220 48448
Web : www.jptechnoindia.com
 
 
 
 
 
 
MULTI CYLINDER FOUR STROKE PETROL ENGINE WITH HYDRAULIC DYNAMOMETER

Engine : Multi-cylinder 4-stroke Petrol Engine, (Maruti make)
Maximum power (P) : 27.6 kW (37 HP)
Rated speed (N) : 5000 R.P.M.
Speed measurement : Digital RPM Indicator
Temperature : Multi - Channel digital Temperature Indicator
Compression Ratio (CR) : 9.2:1
Stroke length : 72.0mm
Connecting rod length : 114mm
Bore (D) : 66.5mm
No. of cylinders : Three or Four
Starting : Key Start with battery
Loading (BHP, Maximum) : Hydraulic Dynamometer.
Water cooling : Water cooling for auxiliary Head
Exhaust gas calorimeter : Shell and Tube Type Calorimeter
(For Heat balance sheet)
Engine Output (Kg.) : Digital Load Indicator for dynamometer
Air flow : By M/S tank, Orifice plate, a Manometer
Fuel flow rate : Glass Burette with cover
Required Service : 15 amp single phase electrical connection
1/2" Continuous water supply
Proper Rigid Concrete foundation

The whole setup is fitted on M.S. Frame & Control panel.

J. P. TECHNO INSTRUMENTS
 
 
 
J. P. TECHNO INSTRUMENTS
953, Bazar Peth Road, Masur
Tal-Karad, Dist - Satara. (Mh)
Cell : + 91 - 98220 48448
Web : www.jptechnoindia.com
 
 
 
 
 
 
J.P.TECHNO INSTRUMENTS
 
www.heattransferlab.in
www.steampowerplants.net
www.fluidmachines.net
J.P.TECHNO INSTRUMENTS
We are Leading Manufactures of Educational Training Equipments and our setup is situated at Satara (MAHARASHTRA, INDIA)
Designed by : MID Hosted by : PBD Promoted by : GID